Chain Driving Downspout Roll Forming Machine Roof Gutter Making Machine 15m / Minute
Technical Parameter
1.1 Rolling speed: 15--18 m/min (not include cutting time)
1.2 Rolling thickness: 0.3-2.6mm
1.3 Raw material: Galvanized steel sheet
1.4 Dimension: 3500×1600×1500(mm)
1.5 Effective width: 60mm
1.6 Roller stations: About 19 stations One stage for embossing
1.7 Roller material: 45#forge steel, coated with chrome
1.8 Shaft diameter: Φ70mm ,material is 45# forge steel
1.9 Transmission: By chain 1 inch
1.10 Material of chain: 45# forged steel with frequency quenching, 12A
1.11 Material of cutting: Cr12Mov with quench HRC58-62°
1.12 Cutting tolerance: 6m+-1.5mm
1.13 Frame: H type steel
Main Components
Number |
Machine list |
Number |
1 |
3T Passive De-coiler | 1 set |
2 |
Feeding and leveling device | 1 set |
3 |
Chain drive system | 1 set |
4 |
Main forming machine | 1 set |
5 |
Curving device | 1 set |
6 |
Hydraulic Cutting device | 1 set |
7 |
Auto stacker 6 meters (oppition) | 1 set |
8 |
PLC control system | 1 set |
9 | Hydraulic station |
1 set |
Working Flow
A.Passive Decoiler..........................................................To load and uncoiling material
B.Servo Feeding Applicator............................................To feed the material accurately
C.Hydraulic/Press Punching...........................................To punch as requirements
D.Roll Forming Unit.........................................................To roll form as requirements
E.Hydraulic Cutting.........................................................To cut sheets as desired length
F.Output Table................................................................Support the finished products
Decoiler ---- Feeding --- Levelling--- Cutting ---Roll forming--- Run out table
Standard Profile of Gutter
Contact Us at Any Time